Research

Published Journal
Conferences
Thesis
Reviewer for Journals
Technical Report
Other Publication

1.J. Naji, A. Zabihollah, M. Behzad, Vibration characteristics of laminated composite beams with magnetorheological layer using layerwise theory, Mechanics of Advanced Materials and Structures, 2016, accepted for publication, in press.
2.J. Naji, A. Zabihollah, M. Behzad, Layerwise theory in modeling of magnetorheological laminated beams and characteristics identification of magnetorheological fluid, Mechanics Research Communications, 2016, pp.50-59,.
3.J. Naji, M. Behzad, A. Zabihollah, Vibration behavior of laminated beams integrated with MR fluid segments, Journal of Mechanics, 20 July, 2016, accepted for publication, in press
4.Saman Momeni, A. Zabihollah, A.Selk Ghafari, Exprimental works on the effects of nano-particles on improvement of dynamic response of non-uniform thickness laminated beam, Journal of Mechanical Science and Technology, 2016, Vol. 30 (1), pp 121-125.
5.M. Hossein Pol, A. Zabihollah, S. Zareie, G. Liaghat, Effects of nano-particles concentration on dynamic response of laminated nanocomposite beam“, Meccanica, 2013,Vol. 19(1), pp.53-57.
6.Seyed Javad Fattahi, A. Zabihollah, Multidisciplinary Constrained Optimization of Power Quality in Doubly Fed Wind Turbine Induction Generator, Modern Mechanical Engineering, 2013, 3,pp. 90-97
7.M. Kolbadi Nejad, A. Selk Ghafari, A. Zabihollah, Fault Detection in a Cracked Pipeline Embedded with Piezoelectric Sensors/Actuators Employing Bond Graph Approach, Advanced Materials Research, 2012, Volumes 476 - 478, pp.1015-1019
8.Reza Jalil Mozhdehi, Ali SelkGhafari, A. Zabiholah, and Ali Meghdari, “Active Vibration Control of a CMOS-MEMS Nano-Newton Capacitive Force Sensor for Bio Application Using PZT“, Advanced Materials Research, 2013 Volume 628 pp 317-323.
9.Farid Parvari Rad, A. Zabihollah Monitoring Pipeline Vibration due to Cavitation through an Orifice by Piezoelectric Sensor, Advanced Materials Research, 2011,Volumes 403 - 408, pp.3418-3423
10.Nozarian, Mohammad Mehdi; Adldoost, Hamed; Zabihollah, A., "Crack Detection in Underground Pipelines Using Piezoelectric Sensors“, Advanced Science Letters, Volume 19, Number 3, March 2013 , pp. 770-774.
11.Masih O. Mahmoudpour, A. Zabihollah, Mohammad A. Vesaghi, “ A Finite Element Model of Coupled Multi-physics Fields for Opto-electromechanical Actuators“, International Journal of Mechanic Systems Engineering, 2012, Volume 2(1), , PP. 15-21.
12.M. Kolbadinejad, A. Zabihollah, A. A. Akbar Khayyat, and M. Mahmoudpour,“ An equivalent electrical circuit design for pipeline corrosion monitoring based on piezoelectric elements” , Journal of Mechanical Science and Technology, 27 (3) (2013) 799~804.
13.S. H. Zareh, A. Sarrafan, A. A. A. Khayyat and A. Zabihollah, “Intelligent semi-active vibration control of eleven degree of freedom suspension system using magnetorheological dampers”, Journal of Mechanical Science and Technology, 26 (2) (2012) 323~334.
14.A. Sarrafan, S. H. Zareh, Amir Ali Akbar Khayyat and A.Zabihollah, Neuro-fuzzy control strategy for an offshore steel jacket platform subjected to wave-induced forces using magnetorheological dampers, Journal of Mechanical Science and Technology 26 (4) (2012) 1179~1196.
15.Gh. Ilkhani Sarkandi, A. Zabihollah, “A Real-Time Corrosion Monitoring System for Fuel Tanks using Fiber Bragg Grating”, Journal of Civil Structural Health Monitoring, DOI 10.1007/s13349-011-0010-z, Aug. 2011.
16.Shahin Zareie, A. Zabihollah, A Failure control method for smart morphing airfoil by piezoelectric actuator”, Transaction of Canadian Society of Mechanical Engineers, Vol. 35, No. 3, 2011
17.Zabihollah, A. and Zareie, S., “Optimal design of adaptive laminated beam using layerwise finite element”, Journal of Sensors, Vol. 2011, ID 240341.
18.S. J. Fattahi, A. Zabihollah and S. Zareie, Vibration Monitoring of Wind Turbine Blade using Fiber Bragg Grating, Wind Engineering, 34(6), 2010, 721-732.
19.Zabihollah, A., Effects of structural configuration on vibration control of smart laminated beams under random excitations, Journal of Mechanical Science and Technology 24 (5) (2010) 1~6.
20.Zabihollah, A. and Ganesan, R., “Buckling Analysis of Tapered Composite Beams using a Higher-order Finite Element Formulation”, Journal of Reinforced Plastics and Composites, 29(17), 2010, 2663-2683.
21.Zabihollah, A., R. Sedaghati, R. Ganesan, “Active vibration suppression of smart laminated beams using layerwise theory and optimal control strategies”, Journal of Smart Materials and Structures, 2007, 16(6), 2190-2201
22.Sokhanvar, S., Zabihollah, A. Sedaghati, R., “Investigating the Effect of the Orthotropic Property of Piezoelectric PVDF on its Sensing and Actuating Capabilities and Response of the System”, Transactions of Canadian Society of Mechanical Engineers, Special edition, Advances in Smart Structures, 2007, 31(1), 111-125.
23.Zabihollah, A., Ganesan, R. and Sedaghati, R., “Sensitivity Analysis and Design Optimization of Smart Laminated Beams Using Layerwise Theory”, Journal of Smart Materials and Structures, 2006, 15(6), 1775-1784.
24.Sedaghati, R., Zabihollah, A. and Ahari, M. “Sensitivity Analysis and Optimal Design of Smart Piezolaminated Composite Beam”, AIAA Journal, 2006, 44 (12), 2987-2996.
25.Ganesan, R. and Zabihollah, A., “Vibration Analysis of Tapered Composite Beams using a Higher-order Finite Element; Part I: Formulation”, Composite Structures, 2005, 77, 306-318.
26.Ganesan, R. and Zabihollah, A., “Vibration Analysis of Tapered Composite Beams using a Higher-order Finite Element; Part II: Parametric Study”, Composite Structures, 2005, 77, 319-330.
27.A. Zabihollah, M.H.Pol, A. S.Ghafari, S. Momeni, Dynamic behavior of laminated composite beam reinforced with high percentage of nano particles, Modares Mechanical Engineering, 2013,Vol. 13(6).
28.Z.S.Fattahi, A. Zabihollah, Vibration behavior of composite plates filled with MR fluids, Modares Mechanical Engineering, 2013,Vol. 13(6).
29.M. Mahmoudpour A. Zabihollah, M. Vesaghi, M. Kolbadinejad, Design and analysis of an innovative light tracking device based on opto-thermo-electro-mechanical actuators, Microelectronic Engineering Volume 119, 1 May 2014, Pages 37-43
30.Nozarian, M. M.; Adldoost, H.; Zabihollah, A., Crack Detection in Underground Pipelines Using Piezoelectric Sensors, Advanced Science Letters, Volume 19, Number 3, March 2013, pp. 770-774(5)
31.Zareh, S. H.; Fellahjahromi, A.; Hayeri, Reza; Khayyat, A. A. A.; Zabihollah, A., LQR and Fuzzy Controller Application with Bingham Modified Model in Semi Active Vibration Control of 11-DOFs Full Car Suspension System., GSTF Journal on Computing . Aug2011, Vol. 1 Issue 3, preceding p1-1. 6p

1.A. Sarrafan, S. H. Zareh, A. Zabihollah, A. A. Khayyat “Intelligent Vibration Control of Micro-Cantilever Beam in MEMS”, Proceedings of the 2011 IEEE International Conference on Mechatronics April 13-15, 2011, Istanbul, Turkey.

2.Adldoost, H. ; Jouibary, B.R. ; Zabihollah, A., Design of SMA micro-gripper for minimally invasive surgery, Biomedical Engineering (ICBME), 2012 19th Iranian Conference of 20-21 Dec. 2012 Page(s): 97 - 100 Print ISBN: 978-1-4673-3128-9 Tehran

3.F. ParvariRad, A. Zabihollah,” Monitoring Pipeline Vibration Due to Cavitation Through an Orifice by Piezoelectric Sensor”, proceeding of the 6th International Conference on MEMS,NANO, and Smart Systems ,ICMENS 2010,14-15 Dec.2010, Changsha, China

4.Zareie, S., Zabihollah, A., Azizi, A. “Buckling control of morphing composite airfoil structure using multi-stable laminate by piezoelectric sensors/actuators”, Proceedings of SPIE - The International Society for Optical Engineering 7978, art. no. 79781Z, doi:10.1117/12.880409

5.Ali Fellah Jahromi, A. Zabihollah, “Linear Quadratic Regulator and Fuzzy controller Application in Full-car Model of Suspension System with Magnetorheological Shock Absorber”, Proceedings of 2010 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2010 , art. no. 5552010, pp. 522-528.

6.Shahriari, M. ; Zabihollah, A., Analytical modeling of a Minimally Invasive Surgery grasper actuated by shape memory alloy wires, International Conference Robotics and Mechatronics (ICRoM), 2013 First RSI/ISM ,13-15 Feb. 2013,Page(s):147 - 151,978-1-4673-5809-5, Tehran, Publisher: IEEE

7.Fattahi, S.J, Zabihollah, A. ; Adldoost, H. Multi sensing grasper for minimally invasive surgery, International Conference Advanced Intelligent Mechatronics (AIM), 2011 IEEE/ASME, 3-7 July 2011 Page(s): 344 - 349 Budapest, Publisher: IEEE

8.H Adldoost, A Zabihollah, SJ Fattahi, Measurement of wall loss in pressure vessels using FBG sensors, 2011 - journaltool.asme.org

9.Ali Fellah Jahromi, A. Zabihollah, “Semi active vibration control of a passenger car using magnetorheological shock absorber”, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010 3, pp. 21-27

10.Siavash Dezfouli, and A. Zabihollah, “Structural Health Monitoring of Buried Pipelines under Static Dislocation and Vibration”, Proceedings of 2010 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, MESA 2010, art. no. 5552052, pp. 325-329.

11.Ganesan, R. and Zabihollah, A., 2004, “Higher-order Finite Element Formulation for Dynamic Analysis of Laminated Composite Beams,” Proceeding of American Society for Composites 19th Annual Technical Conference, Atlanta, Georgia, October, 2004.

12.Ganesan, R. and Zabihollah, A., 2005, “Parametric Study of the Dynamic Response of Composite Beams with Uniform-Thickness and Tapered Laminates”, Proceeding of International Conference on Advances in Structural Dynamics and Its Applications, Visakhapatnam, India, December 2005.

13.Ahari M., Zabihollah, A. and Sedaghati R., 2005, “Optimal Design of Shape Control of Smart Laminated Beams with Embedded Piezoelectric Sensors and Actuators”, Proceeding of The 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, Brazil, 30 may-3 June 2005.

14.Sedaghati, R. Zabihollah, A. M.Ahari, Esmailzadeh, E., “Sensitivity analysis and optimum design of adaptive piezo-laminated composite beam”, Proceeding of 14th Annual (International) Mechanical Engineering Conference - May 2006, Isfahan University of Technology, Isfahan, Iran.

15.Zabihollah, A., Sedaghati, R. Ganesan, R., 2005, “Optimal Design Of Smart Laminated Beams Using Layerwise Theory”, Proceeding of 8th Cansmart Meeting International Workshop on Smart Materials and Structures, October 13-14, 2005, Toronto, Ontario, Canada.

16.Zabihollah, A. Sedaghati, R., Ganesan, R., 2006, “Design Optimization of Smart Laminated Composite Beams using Layerwise Theory”, Proceeding of III European Conference on Computational Mechanics Solids, Structures and Coupled Problems in Engineering C.A. Mota Soares et.al. (eds.) Lisbon, Portugal, 5-8 June 2006.

17.Zabihollah, A., Sedaghati, R., Ganesan, R., “Sensitivity Analysis and Optimization of Smart Laminated Beams by Layerwise Theory”, Proceeding of The Eighth International Conference on Computational Structures Technology, Las Palmas de Gran Canaria, Spain, 12-15 September 2006.

18.Zabihollah, A. and Ganesan, R. “Buckling Analysis of Variable-thickness Composite Beams using a Higher-order Finite Element”, Proceeding of 6th Joint Canada Japan Workshop on Composites, Toronto, Canada, August 24th - 26th, 2006.

19.Zabihollah, A., Ganesan, R., Sedaghati, R., “Optimal vibration control of active laminated beam using unimorphic piezoceramic elements and LQR controller”, Proceeding of 9th Cansmart Meeting International Workshop on Smart Materials and Structures, October 12-13, 2006, Toronto, Ontario, Canada.

20.Zabihollah, A., Ganesan, R., Sedaghati, “Optimal vibration control of smart laminated beams using layerwise theory”, Proceeding of 21st Canadian Congress of Applied
Mechanics CANCAM 2007, June 3-7, Toronto, Canada,

21.Zabihollah, A., Latifi-Navid, M., Zareie, S., “Comparison of classical and optimal control strategies applied for active vibration suppression of adaptive laminated beams”, Proceeding of the Third International Conference on Modeling, Simulation and Applied Optimization, Sharjah, U.A.E. January 20-22, 2009.

22.Zabihollah, A., Ghaffari, H., “Effects of Ply-drop off on Forced Vibration Response of Non-uniform Thickness Laminated Composite Beams”, proceeding of the 1st International Conference on Composites: Characterization, Fabrication, and Application, Kish, 14-16 December 2008.

23.Hortamani, R., Zabihollah, A., “Modeling and Simulation of Graspers Force in Minimally Invasive Surgery”, 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009, art. no. 5169398, pp. 475-479

24.Ghaffari, H., Zabihollah, A., “Application of Vibration Based Technique in Health Monitoring of Multi-stable Laminated Composites”, TIC-STH'09: 2009 IEEE Toronto International Conference - Science and Technology for Humanity, art. no. 5444511, pp. 170-175

25.Ghaffari, H., Zabihollah, A.,” Vibration Based Damage Detection in Smart Non-uniform Thickness Laminated Composite Beams”, TIC-STH'09: 2009 IEEE Toronto International Conference - Science and Technology for Humanity, art. no. 5444511, pp. 170-175.

26.Zabihollah, A., “Vibration Suppression and Design Optimization of Laminated Smart Composite Structures”, Lecture in Research Day, 31 March 2006, Concordia University, Montreal, Canada.

27.Zabihollah, A., “Sensitivity analysis and design optimization of smart laminated beams using layerwise theory”, Presented in Centre for Applied Research on Polymers and Composites, CREPEC, 2005, University of Montreal, Montreal, Canada.

28.Zabihollah, A., “Vibration control of laminated smart structures: Experimental approaches”, Presented in Centre for Applied Research on Polymers and Composites, CREPEC, 2006, Ecole de Technologie Superiore, Montreal, Canada.

1-Theory of Machines, Laboratory manual, published by Concordia University, 2005, Montreal Canada.
2- Finite Element Methods, Laboratory manual, published by Concordia University, 2005, Montreal Canada.
3- Condition Monitoring systems, operation manual for Machine Fault Simulator, published by Concordia University, 2004, Montreal Canada.

1.Modelling of the buckling of a diaphragm-spine structure for a wave energy converter, Materials and Designs, JMAD-D-16-05221, 2016.
2.A modified pin force model for beams with active material bonded, Materials and Designs, JMAD-D-15-04576R1, 2015.
3.Weng W. Chooi and S. Olutunde O yadiji, Design, “Modeling and Testing of Magnetorheological (MR) Dampers”, Journal of Smart Structures and Materials, 2005, Special Issue.
4.Investigation of the high velocity impact behavior of nanocomposites, Polymer Composites, ID ,PC 14-0608, 2014
5.C. M. A. Vasques and J.D. Rodrigues, A. Preumount, B. de, “Simulation of Combined Feedback/Feedforward Active Control of Vibration of Beams with ACLD Treatments”, Journal of Smart Structures and Materials,2005, Special Issue.
6.A. Preumont, B.de Marneffe, A. Deraemaker and F. Bossens, “On Damping Structures with Piezoelectric Transducers”, Journal of Smart Structures and Materials, 2005, Special Issue.
7.Przybylski, J., “The vibration and stability of an articulated column with two collocated piezoelectric actuators”, Journal of Sound and Vibration, Jan. 2007.
8.Saman Ashrafzadeh Ali Najafi, Buckling response of circular hole in different application of laminated composite plate using finite element method”, Proceeding of the Third International Conference on Modeling, Simulation and Applied Optimization, Sharjah, U.A.E. January 20-22, 2009.

1- Zabihollah, A., “Vibration Suppression and Design Optimization of Laminated Smart Composite Structures”, Lecture in Research Day, 31 March 2006, Concordia University, Montreal, Canada.
2- Zabihollah, A., “Sensitivity analysis and design optimization of smart laminated beams using layerwise theory”, Presented in Centre for Applied Research on Polymers and Composites, CREPEC, 2005, University of Montreal, Montreal, Canada.
3- Zabihollah, A., “Vibration control of laminated smart structures: Experimental approaches”, Presented in Centre for Applied Research on Polymers and Composites, CREPEC, 2006, Ecole de Technologie Superiore, Montreal, Canada

o Theory of Machines, Laboratory manual, published by Concordia University, 2005, Montreal Canada.
o Finite Element Methods, Laboratory manual, published by Concordia University, 2005, Montreal Canada.
o Condition Monitoring systems, operation manual for Machine Fault Simulator, published by Concordia University, 2004, Montreal Canada.